SKU:WSAL34124
Gigabit/2.5G Dual Ethernet Industrial Computer Based On Raspberry Pi CM5, Supports 4K Display Output And 4G / 5G Module, Suitable For All Variants Of Compute Module 5
Couldn't load pickup availability
Kurzbeschreibung: Gigabit/2.5G Dual Ethernet Industrial Computer Based On Raspberry Pi CM5, Supports 4K Display Output And 4G / 5G Module, Suitable For All Variants Of Compute Module 5
Designed for Raspberry Pi Compute Module 5
IPCBOX-CM5-ADual Ethernet ports, onboard 4 × RS485 interfaces
IPCBOX-CM5-BDual Ethernet ports, onboard 2 × RS485 + 2 × RS232 interfaces
All versions come with an aluminum alloy case and power supply adapter,please refer to the package content for the detailed part list.
| CM5 socket | Suitable for all variants of Compute Module 5 |
|---|---|
| Networking | 1000M Ethernet RJ45 port × 12500M Ethernet RJ45 port × 1 |
| USB | USB 3.2 Gen1 port × 1 |
| USB 2.0 port × 3 | |
| Video | HDMI interface × 1, supports 4K display output |
| M.2 | M.2 M KEY (PCIe Gen2/3 × 1, 2230 / 2242) |
| M.2 B KEY, supports connecting 4G / 5G communication module | |
| Storage | TF card socket for Compute Module 5 Lite (without eMMC) variants |
| Serial Interface | Options for 2 × RS485 + 2 × RS232 version or 4 × RS485 version |
| 1 × CAN with up to 1Mbps communication rate | |
| Digital Input/Output | 2 × digital outputs + 2 × digital inputs |
| Audio | 3.5mm audio jack (microphone support), PH2.0 speaker header |
| Fan header | 5V, 4PIN JST-SH PWM fan header |
| Buzzer | 1-ch controllable buzzer |
| Other | Onboard EEPROM and encryption chip |
| Power Input | 7V ~ 36V wide voltage range screw terminal, 5V 5A Type-C port |
| Dimensions | 136.00 × 92.00 × 39.50 (mm) |
| CM5 Base Board | Interface count and specifications | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PoE | GigabitETH | 40PINGPIO | PCIe | USB① | MIPI | HDMI | RTC | FanHeader② | PowerInput | Features | ||
 NANO A |
√ | 3.0×1 | ×2 | SH1.0 | √ | 5V | CM5 sized | |||||
 NANO B |
×1 | √ | 16PIN PCIe | 3.0×1 | ×2 | √ | SH1.0 | √ | 5V | CM5 sized | ||
 mini Base A |
×1 | √ | 16PIN PCIe | 3.0×22.0×2 | ×2 | ×2 | ML/CR1220 | √ | 5V | mini size | ||
 mini Base B |
×1 | √ | M.2 M KEY | 3.0×22.0×2 | ×2 | ×2 | ML/CR1220 | √ | 5V | mini size, onboard EEPROM and encryption chip | ||
 Mini Dual Gigabit |
×2 | √ | 3.0×1 | SH1.0 | √ | 5V | dual ETH | |||||
 Dual ETH A |
1G ×1 2.5G ×1 | √ | M.2 M KEY | 3.0×12.0×2 | ×2 | ×2 | ML/CR1220 | √ | 7V~36V | dual ETH, onboard EEPROM and Encryption chip | ||
 Dual ETH B |
1G ×1 2.5G ×1 | √ | M.2 M KEY | 3.0×12.0×1 | ×2 | ×1 | SH1.0 | √ | 5V | dual ETH ports | ||
 Dual ETH 4G/5G |
1G ×1 2.5G ×1 | √ | M.2 M KEY | 3.0×2 | ×2 | ×2 | ML/CR1220 | √ | 7V~36V | dual ETH and 4G/5G support | ||
 PoE Base |
√ | ×1 | √ | M.2 M KEY | 3.0×22.0×2 | ×2 | ×2 | ML/CR1220 | √ | 5V | USB×4 | |
 Raspberry Pi official |
③ | ×1 | √ | M.2 M KEY | 3.0×2 | ×2 | ×2 | ML/CR1220 | √ | 5V | Official IO base board | |
 IPCBOX-CM5 |
1G ×1 2.5G ×1 | M.2 M KEY | 3.0×12.0×3 | ×1 | SH1.0 | √ | 7V~36V | dual ETH, 4G/5G support,RS485/RS232,Encryption chip,EEPROM,CAN,digital inputs,digital outputs,audio,an buzzer | ||||
 CM5 Dual ETH Multi-function |
1G ×1 2.5G ×1 | M.2 M KEY | 3.0×12.0×2 | ×2 | ×1 | SH1.0 | √ | 7V~36V | dual ETH, 4G/5G support,RS485,Encryption chip,digital input,relay,and buzzer | |||
| Note | ① USB 3.0 is equivalent to USB 3.2 Gen1.② Unless otherwise specified, the Fan header usually is JST-SH type connector.③ There's PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A). | |||||||||||
standard CM5 socket suitable for Compute Module 5 Lite / eMMC series module
* for reference only, please refer to the package content for detailed part list
compatible with communication modules with M.2 B KEY interface
* An additional communication module is required to enable 5G/4G/3G/2G cellular network function, recommended: SIM7600G-H-M.2,SIM8260G-M2, and SIM8262E-M2.
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive
* for reference only, please refer to the package content for detailed part list
* Only supports the NVMe Protocol Solid State Drives.
each cut-out is completely aligned with the connector
Aluminum alloy case enables large-area heat conduction and dissipation, combined with heat sink fins, better heat dissipation
Reserved Rail-mount buckle and VASE mounting holes for more convenient installations
* for reference only, comes with rail-mount buckle and is compatible with VESA mounting.
- CM5 socketsuitable for all variants of Compute Module 5
- M.2 M KEYsupports 2242 / 2230 NVMe Solid State Drives or AI modules
- Nano SIM card slot
- TF card slotfor connecting a TF card with pre-burnt system (Lite variant ONLY)
- Dual USB 2.0 portsstandard USB 2.0 ports
- BOOT buttonpress before powering on to enter the burning mode
- PSW power buttonLong press to force power off, short press to soft power off or on
- M.2 B KEYsupports connecting 4G/5G communication module
- Buzzer
- PH2.0 speaker headersupports connecting to 8Ω 5W speaker
- Programming portused for eMMC burning
- 3.5mm Jacksupports audio input and output
- HDMI interfacesupports 4K outputs
- USB ports1 × standard USB 2.0 port, 1 × USB 3.2 Gen1 Type-A port with up to 5Gbps rate
- DC power screw terminalsupports DC 7V ~ 36V power supply
- Indicators
- 1000M Ethernet RJ45 portsupports 10M / 100M / 1000M network connections
- 2500M Ethernet RJ45 portsupports 10M / 100M / 1000M / 2500M network connections
- RTC Batt headerfor connecting with compatible RTC Batt to power the RTC chip
- Multi-function interface1 × CAN interface with up to 1Mbps and 2 × digital outputs + 2 × digital inputs
- RS485 / RS232 interfaceOptions for 2 × RS485 + 2 × RS232 version or 4 × RS485 version
- 120R JumperRS485 and CAN terminal resistor selection (No function for RS232)
Suitable for Raspberry Pi applications in remote communication or other industrial situations
* for reference only, the display, keyboard, and mouse are NOT included, please purchase separately.
- Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
- More options for RAM (2GB / 4GB / 8GB / 16GB)
- More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
- Faster eMMC Flash storage, up to 200 Mbps data rate
- Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
- Adopts B to B connectors, most compatible with Compute Module 4
- Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
- Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Lieferumfang
IPCBOX-CM5-A
- IPCBOX-CM5-A metal case x1
- CM5-IPC-BASE-A-4RS485 baseboard x1
- OPTIONS 12V 4A power x1
- Power adapter cable 15cm x1
- Black nylon spacers x4
- Screws pack x1
- Screwdriver x1
- 6PIN 3.5mm pitch double-layer terminal block x1
- 4PIN 3.5mm pitch double-layer terminal block x1
- Rail-mount buckle x1
- Pink thermal tapes x1
IPCBOX-CM5-B
- IPCBOX-CM5-B metal case x1
- CM5-IPC-BASE-A-2RS485 baseboard x1
- OPTIONS 12V 4A power x1
- Power adapter cable 15cm x1
- Black nylon spacers x4
- Screws pack x1
- Screwdriver x1
- 6PIN 3.5mm pitch double-layer terminal block x1
- 4PIN 3.5mm pitch double-layer terminal block x1
- Rail-mount buckle x1
- Pink thermal tapes x1
Payment methods
Payment methods
