SKU:WSAL20471
Environment Sensor HAT for Raspberry Pi, I2C Bus
Abholverfügbarkeit konnte nicht geladen werden
Kurzbeschreibung: Environment Sensor HAT For Raspberry Pi, I2C Bus
TheEnvironment Sensor HAT is designed for Raspberry Pi, with rich onboard resources including ambient light sensor, VOC sensor, IR / UV sensor, gyroscope, accelerometer, magnetometer, barometer, temperature & humidity sensor, and so on. It uses the simple I2C bus for communicating with Raspberry Pi.
TheEnvironment Sensor HAT gives Raspberry Pi the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, IR ray, UV ray, etc. It can also be used to build a robot that can detect motion and orientation.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
- I2C bus, allows retrieving data by just using two wires
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
| TSL25911FN digital ambient light sensor | |
|---|---|
| I2C address | 0x29 |
| Effective range | 0~88000Lux |
| BME280 temperature, humidity, and air pressure sensor | |
| I2C address | 0x76 |
| Temperature detection | -40 ~ 85℃ (0.01℃ resolution, ±1℃ accuracy) |
| Humidity detection | 0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, ≤2%RH delay) |
| Air pressure detection | 300~1100hPa (0.18Pa resolution, ±1hPa accuracy) |
| ICM20948 motion sensor (9-dof: 3-axis accelerometer, 3-axis gyroscrope, 3-axis magnetometer) | |
| I2C address | 0x68 |
| Accelerometer resolution | 16-bit |
| Accelerometer range (configurable) | ±2, ±4, ±8, ±16g |
| Gyroscope resolution | 16-bit |
| Gyroscope range (configurable) | ±250, ±500, ±1000, ±2000°/sec |
| Magnetometer resolution | 16-bit |
| Magnetometer range | ±4900µT |
| LTR390-UV-1 UV sensor | |
| I2C address | 0x53 |
| Response wavelength | 280nm - 430nm |
| SGP40 VOC sensor | |
| I2C address | 0x59 |
| Measuring range | 0 ~ 1,000 ppm ethanol equivalent |
| Limit condition | < 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail) |
| Response time | < 10 s (tau 63 %) |
| Start time | < 60 s |
| On-chip humidity compensation support | |
Standard Raspberry Pi 40PIN GPIO header, customized for Raspberry Pi series boards
- Raspberry Pi GPIO
- TSL25911FN digital ambient light sensor, for measuring IR and visible light
- LTR390-UV-1 UV sensor
- SGP40 VOC sensor
- ICM20948 3-axis accelerometer, 3-axis gyroscrope, 3-axis magnetometer
- BME280 temperature, humidity, and air pressure sensor
- Logic level conversion 3.3V to 1.8V
- Voltage regulator 5V to 3.3V/1.8V
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Lieferumfang
- Environment Sensor HAT x1
- 2x20PIN female header x1
- 4PIN header x1
- RPi screws pack (2pcs) x1
Zahlungsmethoden
Zahlungsmethoden
