SKU:WSAL28117

ESP32-S3 5inch Display Development Board, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard Antenna, Options For 800×480/1024x600 Display Resolution And Touch Function

ESP32-S3 5″ LCD Development Board

Integrates RGB interface LCD and 5-point capacitive touch (optional)

Version Options

ESP32-S3-LCD-5

Standard version, without touch800×480 pixels, 160° viewing angle

ESP32-S3-LCD-5B

Upgraded version, without touch1024×600 pixels, 178° viewing angle

ESP32-S3-Touch-LCD-5

Standard version, with touch function800×480 pixels, 160° viewing angle

ESP32-S3-Touch-LCD-5B

Upgraded version, with touch function1024×600 pixels, 178° viewing angle

Features

This product is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 5inch LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications

• Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• Onboard 5inch LCD display, options for 800×480/1024x600 resolution, 65K color
• Supports capacitive touch control via I2C interface, 5-point touch with interrupt support (for touch version only)
• Onboard voltage regulator, supports 7~36V wide range power supply
• Onboard RTC chip and battery holder, ensuring time data is not lost when power loss (RTC battery required)
• Onboard CAN, RS485, I2C interface, TF card slot, MX1.25 2P battery header, and digital isolated IO interfaces, etc.
• Supports passive and active digital input, with bi-directional optocoupler isolation
• Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current
• Onboard LED indicators for indicating the power and battery recharging status
• Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

Application Scenarios

IPS Display Panel

Excellent display performance, 178° wide viewing angle *

* 178° viewing angle for the Upgraded Version, and 160° for the Standard Version

Capacitive 5-point touch (Optional)

optional for touch function via I2C interface, supports 5-point touch for flexible operation and smooth multi-point UI interaction

Supports multiple peripherals

Supports the expansion of multiple peripherals via CAN, RS485, I2C and isolated IO interfaces

What's On Board

1. ESP32-S3-WROOM-1-N16R8 The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash
2. TF card slot
3. USB Type-C port
4. BOOT button Press and hold while powering on for program burning
5. RESET button
6. Optocoupler isolation
7. Touch panel connector
8. 5inch display panel connector
9. RS485 and CAN terminal resistors selectionclose by default
10. Battery power supply ON/OFF
11. 3.7V single lithium battery GH1.25 header
12. Status IndicatorsDONE: Lithium battery charging completed indicatorCHG: Lithium battery charging indicator PWR: Power supply indicator (the CHG will blink and DONE will light on when connecting with DC power supply and without lithium battery connected or battery switch is OFF)

13. 7-36V DC power supply terminal
14. I2C interface terminalVOUT pin output 5V/3.3V (switching by onboard resistor)
15. CAN interface terminal
16. RS485 interface terminal
17. Digital output 5~36V, open-drain output, output load: 450mA per channel (MAX)
18. Input signal common terminal NC: dry contact passive inputConnect to power supply positive: digital input low active, for NPN wet contact active input, 5V-36V DCConnect to power supply negative: digital input high active, for PNP dry contact active input, 5V-36V DC
19. Digital input 5~36V, supports passive / active input (NPN or PNP)
20. I2C VOUT output selection for switching output valtage and I/O level of I2C VOUT, 3.3V by default
21. RTC battery holder Compatible with CR927 battery

22. CS8501 Lithium battery recharge manager
23. PCF85063RTC chip for providing accurate time control
24. AP3032KTR-G1Display backlight boost converter
25. CH422GIO expansion chip

26. SP3485RS485 transceiver
27. TJA1051T/3/1JCAN transceiver
28. SGM2212-3.3800mA low-noise LDO

Support Batch Customization

Support software and hardware customizationIncluding hardware interface, LOGO, label, case and web page, etc.

outline dimensions

Without Touch Version

With Touch Version

Resources & Services

Wiki:www.waveshare.com/wiki/ESP32-S3-Touch-LCD-5

ESP32 LCD Selection

Model	Basic Parameters			LCD Parameters			Communication interface							Others
	MCU	Flash	PSRAM	Resolution	ViewingAngle	TouchType	CAN	RS485	I2C	UART	Sensor	DigitalInput	DigitalOutput	Dimensions (mm)
ESP32-S3-Touch-LCD-4 Without Touch / With Touch	ESP32-S3	16MB	8MB	480 × 480	160°	capacitive	√	√	√	-	-	-	-	without touch version: 76.54×74.66 (mm) with touch version: 84.2×84.2 (mm)
ESP32-S3-Touch-LCD-4.3B Standard Ver. / Case Ver.	ESP32-S3	16MB	8MB	800 × 480	160°	capacitive	√	√	√	-	-	√	√	Standard version: 112.4×75.1 (mm) Case version: 116.3×79 (mm)
ESP32-S3 4.3″ LCD Without Touch / With Touch	ESP32-S3	16MB	8MB	800 × 480	160°	capacitive	√	√	√	-	√	-	-	106.1×67.8 (mm)
ESP32-S3 5″ LCD Without Touch / With Touch	ESP32-S3	16MB	8MB	800 × 480	160°	capacitive	√	√	√	-	-	√	√	127.7×87.45 (mm)
ESP32-S3 5″ LCD (B) Without Touch / With Touch	ESP32-S3	16MB	8MB	1024 × 600	178°	capacitive	√	√	√	-	-	√	√	127.7×87.45 (mm)
ESP32-S3-Touch-LCD-7 Without Touch / With Touch	ESP32-S3	16MB	8MB	800 × 480	170°	capacitive	√	√	√	√	√	-	-	without touch version: 165.72×97.60mm with touch version: 192.96×110.76mm
ESP32-S3-Touch-LCD-7B Without Touch / With Touch	ESP32-S3	16MB	8MB	1024 × 600	170°	capacitive	√	√	√	√	√	-	-	without touch version: 165.72×97.60mm with touch version: 192.96×110.76mm

Lieferumfang

Warning: battery inside.

ESP32-S3-LCD-5

OPTIONS ESP32-S3-LCD-5 (with bottom wiring 16PIN screw terminal) x1

ESP32-S3-Touch-LCD-5

OPTIONS ESP32-S3-Touch-LCD-5 (with bottom wiring 16PIN screw terminal) x1

• Verkäufer:

  WaveShare

• Tags: Brand_waveshare,  Cat_board,  Cat_communication,  Cat_display,  Cat_expansion,  Cat_iot,  Cat_kit,  Compat_arduino,  Compat_esp32,  Compat_raspberry_pi,  Iface_wifi,  Platform_arduino,  Platform_esp32,  Platform_raspberry_pi,  Sub_arduino_compatible,  Sub_bluetooth,  Sub_development_boards,  Sub_esp32_s3,  Sub_lcd_rgb,  Sub_short_range_wireless,  Topic_fpga,  Topic_mcu