SKU:WSAL29688
Raspberry Pi Compute Module 5 IO Board With PoE Feature, For All Variants Of CM5
Abholverfügbarkeit konnte nicht geladen werden
suitable for evaluating the Raspberry Pi CM5 or being integrated into end products
PoE Base Board for all Compute Module 5 Variants
PoE Base Boardthe base board only
PoE Mini-Computer Kit PoE Base Board + metal case + power supply adapter
| CM5 socket | suitable for all variants of Compute Module 5 |
|---|---|
| Networking | Gigabit Ethernet RJ45 connector, integrates 802.3af/at-compliant PoE circuit (5V/5A) |
| Connector | Raspberry Pi 40PIN GPIO header |
| USB | USB 3.2 Gen1 × 2 |
| USB 2.0 × 2 | |
| MIPI | 4-lane MIPI interface × 2 (22pin 0.5mm FPC connector) |
| Video | HDMI port × 2, supports 4K output |
| RTC | CR / ML2032 battery holder |
| Storage | TF card slot for Compute Module 5 Lite (without eMMC) variants |
| Fan connector | 5V, JST-SH PWM 4PIN connector |
| NVMe | PCIe Gen2/3 × 1 |
| Power input | 5V 5A |
| Dimensions | the base board: 160 × 90 (mm) |
| with metal case: 200.5 × 97.5 × 31.0 (mm) |
standard CM5 socket and Raspberry Pi 40PIN GPIO headersuitable for all variants of Compute Module 5
providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
* for reference only, please refer to the Package Content for detailed part list
Note: Only supports the NVMe Protocol Solid State Drives.
onboard connectors including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot
each cut-out is completely aligned with the connector
comes with cooling fan, combined with the airflow vent, better heat dissipation
wall mount holes on two sides, handy for mounting
Ideal for Raspberry Pi applications with multiple peripheral requirements, or other industrial context
* for reference only, please refer to the Package Content for detailed part list
- CM5 socket Suitable for all variants of Compute Module 5
- USB Type-C power supply / programming 5V/5A power supply, also allows burning system image into Compute Module 5 variants
- M.2 Solid State Drive indicator Keeps blinking while reading/writing
- M.2 M key Compatible with 2280/2260/2242/2230 NVMe drives or AI accelerator module
- Dual MIPI interfaces for connecting DSI LCDs or CSI cameras
- PSW button power button
- 40PIN GPIO header for connecting various HATs
- RTC battery holder Supports CR/ML2032 button cell
- HDMI ports 2x HDMI ports, supports dual 4K output
- Status indicators ACT: Raspberry Pi operating status indicator PWR: Raspberry Pi power indicator
- USB2.0 ports 2x USB2.0 ports, for connecting sorts of USB devices
- USB 3.2 Gen1 ports 2x USB 3.2 Gen1 high-speed ports, supports 5Gbps synchronous operation
- Gigabit Ethernet connector Gigabit Ethernet RJ45 with PoE support
- FAN connector for connecting cooling fan
- Misc configurations for extending other functions
- IO-VREF/PoE selection CM5 IO logic level: 3.3V or 1.8VPoE: enable (EN) or disable (DIS)
- CAM1 and DISP1 I2C bus fit the jumpers when using CAM1 or DISP1
- TF card slot (bottom side) insert a TF card with pre-burnt system, to start up Compute Module 5 Lite
PoE Base Board
PoE Mini-Computer Kit
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Lieferumfang
CM5-PoE-BASE-A
- CM5-PoE-BASE-A x1
- Screws pack x1
- SSD mounting screw x1
CM5-POE-BOX-A
- Metal case (top and bottom) x1
- CM5-PoE-BASE-A x1
- CM4-IO-BOARD-CASE-A-ADAPTER x1
- CM5-FAN-4010-5V x1
- OPTIONS 27W USB-C power supply x1
- Screwdriver x1
- Antenna connector rubber plug x1
- Button cap x1
- Screws pack x1
Zahlungsmethoden
Zahlungsmethoden
