Raspberry Pi Pico 2 W Microcontroller Board, Based on Official RP2350 Chip, Dual-core & Dual-architecture Design, Supports WIFI and Bluetooth

Raspberry Pi Pico 2 W

The next big tiny thing

Built Using RP2350 Microcontroller Chip Designed By Raspberry Pi

Board specifications

Raspberry Pi Pico 2 W is a low-cost, high-performance microcontroller board with flexible digital interfaces. Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.

Key features include:

• RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
• Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2
• 520KB of SRAM, and 4MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards *
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Temperature sensor
• 12 × Programmable I/O (PIO) state machines for custom peripheral support

* Note: the Pico 2 WH is the official version with pre-soldered header, no castellated holes design, can only be connected to the carrier board via pin header.

Pico Comparison

Model	Pico 2 W	Pico 2	Pico W	Pico
processor	Dual-core ARM Cortex-M33or dual-core Hazard3 RISC-V@150MHz		Dual-core ARM Cortex-M0+@133MHz
SRAM	520KB		264KB
Flash	4MB		2MB
WIFI	2.4GHz 802.11n WIFI 4	-	2.4GHz 802.11n WIFI 4	-
Bluetooth	Bluetooth 5.2	-	Bluetooth 5.2	-
Security	Signed boot support, OTP storage for boot decryption key, and hardware SHA-256 accelerator, etc.		-
Peripherals	2 × UART 2 × SPI 2 × I2C 3 × ADC 1 × USB 1.1 and PHY 16 × PWM
	12 × PIO state machines		8 × PIO state machines
	1 × HSTX		-
GPIO pins	26

Version Options

Raspberry Pi Pico 2 W Original

Raspberry-Pi-Pico-2-W-M Pico 2 W Original with pre-soldered header (mono)

Raspberry-Pi-Pico-2-W-CC Pico 2 W Original with pre-soldered header (color-coded)

Raspberry Pi Pico 2 WH Originalthe official version with pre-soldered header (black)

Kit Selection Guide

Pico 2 W Starter Kit

This kit includes the Raspberry Pi Pico 2 W with pre-soldered header (mono), an experimental board, jumper wires, and a clear Acrylic protection case, which is more convenient to get started and begin your DIY creations.

Pico 2 W Basic Kit

On the basis of the starter kit, this kit includes LCD1602 RGB Module, PIR motion sensor, RGB LED, alarm, single-joint potentiometer, and 5mm LED, etc. With the official tutorial, you can quickly get started with MicroPython programming.

Pico 2 W Evaluation Kit

On the basis of the starter kit, this kit includes Pico-LCD-1.3,Pico-10DOF-IMUandPico-Dual-Expander, etc. Simply connect the Pico 2 W and these two Pico HAT to the GPIO expander board, you can quickly set up a fully functional evaluation platform and start your innovation journey.

Pico 2 W Sensor Kit

On the basis of the starter kit, equipped with entry-level Raspberry Pi Pico 2 W Sensor Kit which is including 15 common modules such as LED, button, buzzer, etc. All-in-one design, all modules are connected to Pico 2 W via PCB castellated holes, no soldering or wiring is required. Each module can be easily separated for individual use, offering more flexibility for your experiments and projects. Standard Raspberry Pi Pico 2 W header, plug-and-play, also comes with clear Acrylic protection case, this kit is your ideal choice to quickly build prototypes or explore the functionality of various sensors

The Raspberry Pi Pico Sensor Kit includes

• Standard Raspberry Pi Pico 2 W header
• 1.5inch OLED Module
• 6-Axis Motion Sensor
• Potentiometer Module
• Photosensitive Resistor Module
• Sound Sensor Module
• RGB LED Module
• Buzzer Module

• VOC Sensor Module
• IR Receiver Module
• IR Transmitter Module
• Button Module
• LED Module
• Temperature/Humidity Sensor Module
• EEPROM Module
• Motor Drive Module

C/C++, MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started

dual-core, dual-architecture

The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment

WIFI and Bluetooth Support

Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2

26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration

outline dimensions

Resources & Services

Wiki:www.waveshare.com/wiki/Raspberry_Pi_Pico_2_W

Pico Product Selection

PRODUCT	Voltage regulator chip	USB	Flash	Lithium battery header	Onboard LCD
RP2350 chip
Raspberry Pi Pico 2	DC-DC, 800mA	Micro USB	4MB	-	-
Raspberry Pi Pico 2 W	DC-DC, 800mA	Micro USB	4MB	-	with WIFI and Bluetooth
Raspberry Pi Pico 2 WH	DC-DC, 800mA	Micro USB	4MB	-	with WIFI and Bluetooth
CAN ver.	DC-DC, 2000mA	Type-C	4MB	-	CAN interface
Type-A ver.	LDO, 500mA	Type-A	4MB	-	-
Type-C ver.	LDO, 800mA	Type-C	4MB	-	-
Tiny ver.	LDO, 800mA	Separate Type-C port adapter	4MB	-	Separate adapter board design, adapting USB Type-C port via FPC
RGB Matrix ver.	LDO, 800mA	Type-C	16MB	-	Onboard 8 x 8 RGB LED Matrix
ETH Port ver.	LDO, 800mA	Type-C	4MB	-	with Ethernet port
USB ver.	LDO, 500mA	Type-A, Type-C	2MB	-	with PIO-USB Type-A and USB Type-C port
core board	LDO, 800mA	Separate Type-C port adapter	16MB	-	-
wireless Plus ver.	LDO, 800mA	Type-C	16MB	-	Supports Wi-Fi and Bluetooth
1.28inch Round LCD ver.	LDO, 300mA	Type-C	4MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch IPS LCD
1.28inch Round Touch LCD ver.	LDO, 300mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch IPS touch LCD
1.43inch Round Touch AMOLED ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.43inch AMOLED Touch LCD
1.64inch Touch AMOLED ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.64inch AMOLED Touch LCD
1.75inch Round Touch AMOLED ver.	DC-DC, 2000mA LDO,300mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.75inch AMOLED Touch LCD
1.8inch Touch AMOLED ver.	DC-DC, 2000mA LDO，300mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.8inch AMOLED Touch LCD
1.46inch Round Touch ver.	DC-DC, 2000mA	Type-C	16MB	-	1.46inch touch LCD
1.47inch LCD ver.	LDO, 300mA	Type-C	16MB	-	1.47inch IPS LCD
1.47inch LCD USB ver.	LDO, 300mA	Type-A	16MB	-	1.47inch IPS LCD
1.54inch LCD ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.54inch IPS LCD
1.54inch Touch LCD ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.54inch IPS Touch LCD
1.69inch Touch LCD ver.	LDO, 500mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.69inch Touch LCD
2inch Touch LCD ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	2inch Touch LCD
2.1inch Round Touch LCD ver.	LDO, 800mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	2.1inch Touch LCD
2.1inch Round Curved Touch LCD ver.	LDO, 800mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	2.1inch 2.5D Curved Touch LCD
2.41inch Touch AMOLED ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	2.41inch Touch AMOLED
2.8inch Touch LCD ver.	LDO, 800mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	2.8inch IPS Touch LCD
2.8inch Round Touch LCD ver.	LDO, 800mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	2.8inch IPS Touch LCD, RGB interface
3.49inch Touch LCD ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	3.49inch IPS Touch LCD
3.5inch Touch LCD ver.	DC-DC, 2000mALDO, 300mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	3.5inch Touch LCD
4inch LCD ver.	LDO, 800mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	4inch IPS LCD, RGB interface
4inch Touch LCD ver.	LDO, 800mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	4inch IPS Touch LCD, RGB interface
4.3inch Touch LCD ver.	LDO, 800mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	4.3inch IPS Touch LCD, RGB interface
7inch Touch LCD ver.	DC-DC, 3000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	7inch IPS Touch LCD, RGB interface
7inch LCD ver.	DC-DC, 3000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	7inch IPS LCD, RGB interface
0.96 LCD ver.	DC-DC, 2000mA	Type-C	4MB	Support(allows recharging the battery and powering the board at the same time)	0.96inch IPS LCD
Plus ver.	DC-DC, 2000mA	Type-C	4MB/16MB	Support(allows recharging the battery and powering the board at the same time)	-
DVI port ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	Onboard DVI interface, TF card slot and PIO-USB port
RP2040 chip
Raspberry Pi Pico W	DC-DC, 3000mA	Micro USB	2MB	-	with WIFI
Raspberry Pi Pico WH	DC-DC, 3000mA	Micro USB	2MB	-	with WIFI
Raspberry Pi Pico	DC-DC, 800mA	Micro USB	2MB	-	-
Raspberry Pi Pico H	DC-DC, 800mA	Micro USB	2MB	-	-
Type-A ver.	LDO, 500mA	Type-A	4MB	-	-
Mini ver.	LDO, 800mA	Type-C	2MB	-	-
Tiny ver.	LDO, 500mA	Separate Type-C port adapter	2MB	-	Separate adapter board design, adapting USB Type-C port via FPC
RGB Matrix ver.	LDO, 500mA	Type-C	2MB	-	Onboard 5×5 RGB LED matrix
BLE ver.	LDO, 300mA	Separate Type-C port adapter	2MB	-	Supports Bluetooth 5.1, separate adapter board design, adapting USB Type-C port via FPC
ETH Port ver.	LDO, 500mA	Type-C	4MB	-	with Ethernet port
0.99inch Round LCD with case ver.	LDO, 500mA	Type-C	2MB	-	0.99inch IPS LCD, CNC metal case
1.28inch Round LCD ver.	LDO, 300mA	Type-C	2MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch IPS LCD
1.28inch Round LCD with case ver.	LDO, 300mA	Type-C	2MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch IPS LCD, CNC metal case
1.28inch Round Touch LCD ver.	LDO, 500mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch Touch LCD
1.28inch Round Touch LCD with case ver.	LDO, 500mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch Touch LCD, CNC metal case
1.69inch Touch LCD ver.	LDO, 500mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.69inch Touch LCD
1.85inch Touch LCD ver.	DC-DC, 2000mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.85inch Touch LCD
0.96 LCD ver.	DC-DC, 1800mA	Type-C	2MB	Support(allows recharging the battery and powering the board at the same time)	0.96inch IPS LCD
Plus ver.	DC-DC, 1800mA	Type-C	4MB/16MB	Support(allows recharging the battery and powering the board at the same time)	-
DVI port ver.	LDO, 300mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	Onboard DVI interface, TF card slot and PIO-USB port
Cam & LCD ver.	-	Type-C	16MB	-	Onboard grayscale camera and 1.14inch IPS LCD display

Lieferumfang

Raspberry Pi Pico 2 W Original

Raspberry Pi Pico 2 W x1

Raspberry Pi Pico 2 WH Original

Raspberry Pi Pico 2 WH x1

Raspberry-Pi-Pico-2-W-M

1. Raspberry Pi Pico 2 W with pre-soldered header (mono) x1
2. 1*3PIN yellow pin header x1
3. USB-A to micro USB cable ~1.2m x1

Raspberry-Pi-Pico-2-W-CC

1. Raspberry Pi Pico 2 W with pre-soldered header (color-coded) x1
2. 1*3PIN yellow pin header x1
3. USB-A to micro USB cable ~1.2m x1

Raspberry-Pi-Pico-2-W-Starter-Kit

1. Raspberry Pi Pico 2 W with pre-soldered header (mono) x1
2. Acrylic protective case (top and bottom) x1
3. Experimental board + jumper wires x1
4. USB-A to micro USB cable ~1.2m x1

Raspberry-Pi-Pico-2-W-Basic-Kit

1. Raspberry Pi Pico 2 W with pre-soldered header (mono) x1
2. Experimental board + jumper wires x1
3. USB-A to micro USB cable ~1.2m x1
4. PIR sensor 2PCS x1
5. Single-joint potentiometer x1
6. 8-Bit WS2812 RGB LED x1
7. Round-shape button 3PCS x1
8. Alarm x1
9. 330R resistor 10PCS x1
10. 5mm LED 6PCS x1
11. LCD1602 RGB Module x1
12. Jumper wire 2.54mm pitch male-male 10PIN ~200mm x1
13. Jumper wire 2.54mm pitch female-female 10PIN ~200mm x1
14. Jumper wire 2.54mm pitch male-female 10PIN ~200mm x1
15. Plastic storage box x1
16. Acrylic protective case (top and bottom) x1

Raspberry-Pi-Pico-2-W-Kit-B

1. Raspberry Pi Pico 2 W with pre-soldered header (mono) x1
2. Pico-LCD-1.3 x1
3. Pico-10DOF-IMU x1
4. Pico-Dual-Expander x1
5. Acrylic protective case (top and bottom) x1
6. USB-A to micro USB cable ~1.2m x1
7. Black anti-slip rubber 4PCS x1
8. Experimental board + jumper wires x1
9. Jumper wire 2.54mm pitch male-female 10PIN ~200mm x1
10. Jumper wire 2.54mm pitch female-female 10PIN ~200mm x1
11. Jumper wire 2.54mm pitch male-male 10PIN ~200mm x1

Raspberry-Pi-Pico-2-W-Sensor-Kit

1. Pico-Sensor-Kit-B x1
2. Raspberry Pi Pico 2 W with pre-soldered header (mono) x1
3. Acrylic protective case (top and bottom) x1
4. PH2.0 4PIN cable ~300mm (5pcs) x1
5. PH2.0 dual-plug 4PIN cable (15pcs) x1
6. IR remote controller x1
7. USB-A to micro USB cable ~1.2m x1