SKU:WSAL18307

UPS Power Module for Jetson Nano, 5V Uninterruptible Power Supply, Multi Battery Protection Circuits

Uninterruptible Power Supply for Jetson Nano

Power Jetson Nano seamlessly from power connection OR the backup batteries

Stable 5V Output, Real Time OLED Monitor

SAFETY CAUTIONS

• Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
• Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
• Do not mix use old batteries with new ones, avoid using batteries of different brands.
• When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
• Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
• Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.

Features at a glance

• I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
• 0.91" OLED for displaying info like batteries voltage, IP address, RAM usage, etc.
• Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
• Onboard 5V regulator, up to 2.5A continuous output current
• Batteries warning indicators, easy to check if the battery is connected correctly
• Comes with development resources and manual

Specifications

Output voltage	5V	Charger	8.4V 2A
Control bus	I2C	Dimensions	113 × 79mm
Battery support	18650 Li battery (NOT included)	Mounting hole size	2.5mm

Uninterruptible Power

It is able to charge the batteries and provide power output at the same time from external power supplyAutomatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble

Designed for Jetson Nano Developer Kit

Mounting holes are compatible with Jetson Nano Developer KitCommunicating via I2C bus through 6PIN cable, no other IO pin required

Real time monitoring

0.91" OLED for monitoring batteries voltage, current, power, remaining capacity...

When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss

Safe and stable circuit design

Protection circuits for over charge/discharge, over current, short circuit, and reversealong with the equalizing charge feature, more safe and stable

Longer battery life

Supports 4x 18650 batteries

Outline dimensions

Resources & Services

---

WIKI:www.waveshare.com/wiki/UPS_Power_Module

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Selection guide

Model	Device Support	Battery Support	feature
Pico-UPS-A	Raspberry Pi Pico	14500 Li-ion battery (NOT included)	Provides power supply via pin header
Pico-UPS-B		600mAh 3.7V Li-po battery	Provides power supply via pin header
UPS HAT (C)	Raspberry Pi Zero	803040 Li-po battery 1000mAh 3.7V	Provides power supply via Pogo pins
Li-ion Battery HAT		14500 Li-ion battery (NOT included)	UPS not supported
UPS HAT (B)	Raspberry Pi 5/4B/3B+	18650 Li battery × 2 (NOT included), up to 5A output current, with 8.4V battery charger	Provides power supply via Pogo pins, with 5V USB output
UPS HAT (E)		21700 Li battery × 4 (in series, NOT included), up to 5V 6A output current, 40W bi-directional fast charging Type-C port	Provides power supply via Pogo pins, with 5V USB output
UPS HAT	Raspberry Pi 4B/3B+	18650 Li battery × 2 (NOT included), up to 2.5A output current, with 8.4V battery charger	Provides power supply via pin header, with 5V USB output
UPS HAT (D)		21700 Li battery × 2 (in parallel, NOT included), up to 2.5A output current, with 5V Type-C port battery charger	Provides power supply via Pogo pins, with 5V USB output
Li-polymer Battery HAT		3.7V 3000mAh 104060 Li-polymer battery, up to 2A output current	Provides power supply via pin header, UPS not supported
UPS Power Module	Jetson Nano	18650 Li battery × 4 (NOT included), up to 2.5A output current, with 8.4V battery charger	Provides power supply via 6PIN cable, with OLED screen
UPS Power Module (B)		18650 Li battery × 4 (NOT included), up to 5A output current, with 8.4V battery charger	Provides power supply via Pogo pins
UPS Power Module (C)	Jetson Orin Nano Jetson Orin NX	21700 Li battery × 3 (in series, NOT included), the output voltage is same as the input voltage when there is power input or equals the battery voltage (9V~12.6V) when there is no power input, supports 15V~19V input input voltage	Provides power supply via Pogo pins
UPS Module 3S	Suitable for the devices with Type-C power port	18650 Li battery × 3 (in series, NOT included), up to 5V 5A output, with 12.6V battery charger	Adapting various interfaces via cables
UPS Module Mini	Suitable for CM4-IO-WIRELESS-BASE-B base board, etc.	10440 Lithium battery × 3 (in parallel, NOT included), up to 5V 2.5A output	Provides power supply via pads or pin header

Lieferumfang

• The 18650 batteries are NOT included
• Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more

1. UPS Power Module x1
2. OPTIONS 8.4V battery charger x1
3. 6PIN 9cm cable x1
4. Screws pack x1

1

2

3

4

• Verkäufer:

  WaveShare

• Tags: Brand_waveshare,  Cat_accessory,  Cat_expansion,  Compat_raspberry_pi,  Platform_raspberry_pi,  Sub_others,  Sub_power,  Sub_relays,  Sub_scr,  Sub_sd_card,  Sub_wires,  Topic_ai,  Use_misc_modules